DavidPoz

R-Value Stack Calculator

Build a wall, ceiling, or floor assembly layer by layer and see how your insulation stacks up. Select a preset or start from scratch.

Layers

R-Value

R-0.17

R-Value

R-0.63

R-Value

R-11.20

R-Value

R-0.45

R-Value

R-0.68

Assembly Summary

Total Assembly R-Value

R-13.1

Total Layers

5

Thickest Insulation Layer

Fiberglass Batt at R-11.2

Insulation Stack

Exterior Air Film — R-0.17
Plywood / OSB — R-0.63
Fiberglass Batt — R-11.20
Drywall (1/2") — R-0.45
Interior Air Film — R-0.68

Product recommendations coming soon — check back for direct links to compatible parts.

How this works

R-values measure thermal resistance — the higher the number, the better a material insulates. When materials are layered in series (like a wall assembly), their R-values are additive. A wall with R-3.5 insulation and R-0.5 sheathing has a total R-value of R-4.0 (plus air films).

Air films account for the thin layer of still air at interior and exterior surfaces. These add a small but consistent R-value to every assembly — about R-0.68 on the interior side and R-0.17 on the exterior (for a 15 mph winter wind).

Thermal bridging through studs, joists, and fasteners reduces the effective R-value of an assembly. This calculator gives the clear-cavity R-value (between framing members) and does not account for thermal bridging. Actual whole-wall performance will be lower than the value shown here.

For a more accurate estimate of effective R-value, consider the parallel-path or isothermal-planes method, which factors in the percentage of framing area and its lower R-value.

Links on this page may be affiliate links. We earn a small commission at no extra cost to you.

Need Help With Your Insulation?

Book a consultation to get a personalized plan for your home.

Schedule a Consultation