Breaker / Circuit Load Calculator
Add devices to a circuit and see if your breaker can handle the load. Checks NEC 80% continuous load rule and flags overloads.
Devices on Circuit
Load Summary
Total Load
—
Breaker Rating
20A at 120V
Safe Continuous Load (80%)
16A / 1,920W
Load Percentage
—
Product recommendations coming soon — check back for direct links to compatible parts.
How this works
The NEC (National Electrical Code) requires that continuous loads — devices running 3 or more hours — not exceed 80% of the breaker rating. Non-continuous loads can use the full rating.
This calculator assumes continuous operation for safety. Actual circuit design should account for motor startup surges, derating for temperature, and conductor sizing.
Total load (watts) is divided by the circuit voltage to get amps, then compared against the breaker rating. The 80% threshold is highlighted as the safe continuous limit.
Links on this page may be affiliate links. We earn a small commission at no extra cost to you.
Need Help With Your Electrical System?
Book a consultation to get a personalized plan for your home.
Schedule a Consultation